Latest pump machinery repair Tenders | Government pump machinery repair Tenders

State Government

CTN :44798192

28 Apr, 2026 1.97 Lacs

Durg - Chhattisgarh

Tender For the detail of works includes:a. the tenderer shall carryout the following works during annual maintenance contract period along with the servicing of the diesel generator set.1. general checkup & preventive maintenance and to fill up preventive checkup schedule as follows:a) check lube oil level and conditioning of lube oil, top up/refill if required.b) the oil filters shall be replaced whenever oil is changed.c) the air filters shall be cleaned periodically with compressed air, check batteries and top up the distilled water if required.d) check functioning of changing alternator.e) engine safety viz. high water temperature gauge, oil temperature gauge and high speed gauge shall be checked for their functions and repaired/replaced if required.f) coolant level and conditioning of coolant shall be checked and refilled if required.g) check fan and alternator drive belts and tightened if required.h) the governor shall be checked and tuned for proper functioning.i) check for leaks if any and shall be rectified.j) check reports shall be submitted every month/every breakdown calls.2. checking and servicing of engine for smooth running, its unusual sound and color of smoke and exhaust and set it right in case of deviations.3. checking and repairing and leakage of fuel, lubricating oil and coolant.4. cleaning and changing of air filters as per requirement.5. setting of valves tappets whenever required.6. checking and repairing of accessories drive, turbo charger and crankshaft endplay whenever required.7. checking of alignment of engine & alternator as per requirement.8. checking of throttle control and its setting.9. checking of instrument panel including replacement as and when required.10. checking of rotating diodes assembly in brushless alternator including replacement as and when required.11. checking of wiring system and repairing/replacement as and when required.12. repair and maintenance of relays including contractors in control panel.13. checking of battery terminal and de-sulphating.14. diagnosis of faults in engine and alternator and its rectification.15. breakdown calls to be attended on priority within 6 hrs.16. providing spare avrs, self-starter and accessories, free of charge, if the repair/overhaul/replacement is expected to be taken in more than two days.17. checking/repair/adjustment/replacement/servicing shall be carried under annual maintenance contract except cost of component/parts to be replaced due to wear & tear.18. the firm should undertake to arrange genuine spares of the diesel engine, alternator and amf panel as and when required within two working days.19. the tendererâ€™s service engineer shall visit the site for attending the generator sets not less than twelve times during the contract period (minimum once in a month) and shall inspect the generator set thoroughly. each visit shall take place during 1st week of each month.20. the tendererâ€™s service engineer shall visit once in two month for checking of electrical side viz. alternator, amf control panel, if any.21. the engine shall be run on no load or at available load, and should be checked for any leakage and abnormal noise. if any such abnormality noticed shall be diagnosed and remedial action shall be taken.22. standard check list:a) replace minor parts (i.e hoses and filters etc) sub-assemblies as and when required.b) service engineers during the visit will report on the performance or any other abnormality and inform parts requirement. he shall also submit the report on work done and recommendations as well as spare parts required.c) attend emergency call on priority (usually same day). however, if the engineer is required or any particular date and time, it would be the responsibility of the customer to intimate the contractor in advance.d) major overhauling/ top overhauling / pt pump & injector calibration /replacement of major parts/ rewinding of alternator or repairs or breakdown of the diesel generator set are to be charge

CTN :44514158

11 Apr, 2026 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : tender for supply of c16m260012 spares for pump - thrust washer for hs shaft assy(upper) , shaft seal , p.n 45 , thrust washer for hs shaft assy(lower) , thermal barrier gasket , seal rotary face for g.b side , set of coupling , o-ring for pump casing , p.n 84 , o-ring repair kit , for 211g102 , journal brg-hgh spd shft assy(uppr)p/n49 , diffuser , p/n.3 , code.gsb-l2-14/807-02 , tab washer , p/n.6 , code.gsb-l.01-01 , idler(intermediate) shaft assy , p/n.28 , set of high spd shft assy w/ key , p/n.25 , impeller , p/no.8 , code.gsb-l2-14/807-01 , lube oil filter , p/n.29 , code.clx-200 , set of mech. seal assy. for g/b , p/n.21 , gasket , p/n.73 , code.gsb-l2.02-07

corporations/Associations/Others

CTN :44379326

13 Apr, 2026 4.90 Lacs

Bankura - West Bengal

Tender For corrigendum : supply of coal feeder damper seal lube oil pump coupling pa fan coupling bolt for the coal mill u1to6 d d -coupling half , seal s s for hot air damper size 1750mmx100mmx0. 1mm , rubber bushing n stud of drive pulley of coal feeder , ring flange for flexible cam coupling spares for fluid coupling , shear pin for elecon make gearbox as per sample material , jaw flex coupling size hrc 110 rfc 11 or equivalent , jaw flex coupling size hrc 90 rfc9 or equivalent , bolt coupling for pa fan with bush nut outer circlip n ms washer spares for coal mill bolt coupling for pa fan with bush nut outer circlip n ms washer spares for coal mill

State Government

CTN :44752391

13 Apr, 2026 NA

Kheda - Gujarat

Tender For supply of spares for pa fan & aph lop for stage-1 at wtps. - gear pump, capacity-10 lpm, discharge pressure 2.5 kg / cm2, speed 1400 rpm of "tushaco" make, model no. rt-10 for lube oil system of p.a. fan type ndfv22b , tushaco make tripple screw pump, type/model : t3s-25/46, size: 1" x 1" npt, capacity: 15 lpm , discharge pressure : 5 kg/cm2, rpm:1500

State Government

CTN :44692201

19 Apr, 2026 NA

Akola - Maharashtra

Tender For procurement of hp (4 bodied) and b&s (2 bodied) lube oil pump spares for bbd 4772 type coal mill of 2x250 mw units at paras tps.

Central Government/Public Sector

CTN :44393971

10 Apr, 2026 NA

Nashik - Maharashtra

Tender For corrigendum : supply of spares for high pressure air compressor d d -kit 681072043285 , piston ring set 681085014002 , piston ring set 2nd stage 686002065084 , piston ring 2nd stage taper faced 686002065085 , shaft seal 686002080017 , gasket 3177 681072043287 , screw n20649 681072043288 , o ring n18617 681072043289 , o ring n4735 681072043295 , backup o-ring n4736 681072043296 , gasket 13283 681072043299 , o ring n15093 686002065090 , v belt n2599 686002100027 , piston ring 3rd stage n16313 686002065088 , piston ring 4th stage n25502 686002065086 , solenoid coil n18363 689484001089 , lube oil n28355 cpmpressor pump 613100500031

Central Government/Public Sector

CTN :44746473

09 Apr, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of b check kit for 500 kva d.g. set of eog power car, engine model ,no. cpcb iv .one kit consists of (1) filter fuel, part no. 4389070- qty per kit: 01 no (2) foil sealed test strips cc2602b (3-way strip), part no. 3403800- qty per kit : 01 no (3) element, lub oil filter, part no. 5465813- qty per kit: 01 no (4) cartridge fuel filter, part no. 5627726- qty per kit : 01 no (5) after treatment def dosing unit filter, part no. a059z389- qty per kit: 01 no. (6) after treatment def intake filter, part no. a035d361- qty per kit: 01 no. (7) inhibitor corrosion 10 liter, part no. 4926654- qty per kit: 01 no (8) belt, v ribbed (water pump drive), part no: 5663603- qty per kit: 01 no. (9) lube oilck4, grade- 15w40, 55 liters can part no. 506655- qty per kit: 01 no. note : make : cummins ,engine model no, cpcb iv . as per rdso file no.rdso-pe0peb(das)/1/2020-ed/psemu/rdso-part(2) l.no.el/0.6/da set dated 19.03.2025 note: - as per railway board l.no.2006 elect. (g) 1381pt dated 16.07.2024 all the kit and spares should be procured from the oem or their authorized dealer. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44666750

07 Apr, 2026 87.77 Lacs

Bhiwani - Haryana

Tender For renovation of water supply scheme - dnit name :garanpura khurd :-dnit for renovation/up-gradation of water supply scheme and laying of di pipe line in balance streets in village garanpura khurd tehsil tosham distt, bhiwani” construction of 1 no. s/s tank, construction of 1 no. clear water tank, construction of 1 no filter bed, construction of cc road and path, laying of pipe line for head works, repair of existing sands tank, repair of existing high level tank, repair of existing clear water tank, repair of existing rcc np-2 pipe inlet channel, repair of pump chamber, repair of existing filter bed, replacement of pumping machinery, repair of boosting station and laying of distributions system in in village garanpura khurd and all other works contingent thereto”

CTN :44652558

16 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of propeller pump coupling with acoustic wheel , circlip , spare kit ra , mechanical seal , impeller nut , shaft liner-sleeve , impeller , hexagonal fitted screw , collar nut , cable gland , rim v200 st1-50d , rim st vp100 , worm 100 1-30d mhi32 s1 , worm 200 1-50 d mhi32s1 , drive sleeve , immovable rim , coupling rotex , hexagonal nut , hexagonal nut , hexagonal fitted screw , split lip seal dint480 ls aft-gearbox p28 , minor kitsee kit g053 , flat gasket for aft low speed seal suport , seal ring a26x34 for ball valves and nozzles , casing gasket 274.7283.9x0.5 , mechanical seal complete u3.0d , driven lube oil pump spares set , sea water driven pump spares set , 3mm thick shim , plate locking pin hs , plate locking pin lower case , hs fore-ls fore inspection door gasket , hs aft inspect door gasket , adjusting shim , adjusting shim , switch 4 positions , flat gasket for aft low speedseal support , gearbox 3 ways ball valve dn40 , gearbox 3 ways ball valve symetrical dn40 , gearbox 2 ways ball valve dn25 , gearbox 2 ways ball valve dn40 , steel ball valve with npt 1-2 threaded sleeves - nd15 , filter for fan , starboard seawater driven pump , generic diffrential pressure switch , differential pressure switch series f , relative pressure transmiter 0-10 bar 4-20ma without display , excess pressure valve on oil system , shftline rpm transmitter , fastener bellows , thrust sensor , thrust measurement electronic cabinet , thrust measurement cabinet spares set , seawater pump coupling , split lip seal dint270 hs fore , reinforced bellow nd 200 , bellow nd 200 , bellow nd 40 , reinforced bellow nd 50 , bellow nd 50 , temperature transmitter type pt 100 l-110 , temperature transmitter type pt 100 l-65 , temperature transmitter type pt 100 l-77 , adjusting shim for seawater pump , adjusting shim seawater pump square , adjusting shim 230x 320 for sea water pump support , gasket for pump and heater , seal ring a26x34 for ball valves and nozzles , mechanical seal , multiple actuator , viton oil seal 70 110 8

CTN :44426298

02 Apr, 2026 NA

Guna - Madhya Pradesh

Tender For corrigendum : tender for supply of procurement of lube oil pump spares for expander compressor at lpg plant gail vijiaipur : : - as per technical specification annexure-iv of the tender document line item 1 , as per technical specification annexure-iv of the tender document line item 2 , as per technical specification annexure-iv of the tender document line item 3 , as per technical specification annexure-iv of the tender document line item 4 , as per technical specification annexure-iv of the tender document line item 5

Pump Machinery Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government